More IEC International Electrotechnical Commission Information
IEC 60730-1:2013/AMD2:2020-Amendment 2-Automatic electrical controls-Part 1: General requirements, IEC TS 62607-4-2:2016-Nanomanufacturing-Key control characteristics-Part 4-2: Nano-enabled electrical energy storage-Physical characterization of cathode nanomaterials, IEC 60704-2-1:2020-Household and similar electrical appliances-Test code for the determination of airborne acoustical noise-Part 2-1: Particular requirements for dry vacuum cleaners, IEC 60212:2010-Standard conditions for use prior to and during the testing of solid electrical insulating materials, IEC 60601-2-29:2008-Medical electrical equipment-Part 2-29: Particular requirements for the basic safety and essential performance of radiotherapy simulators, IEC 60512-99-001:2012-Connectors for electronic equipment-Tests and measurements-Part 99-001: Test schedule for engaging and separating connectors under electrical load-Test 99a: Connectors used in twisted pair communication cabling with remote power, IEC 60349-2:2010-Electric traction-Rotating electrical machines for rail and road vehicles-Part 2: Electronic converter-fed alternating current motors, IEC 60335-2-74:2002+AMD1:2006+AMD2:2009 CSV-Household and similar electrical appliances-Safety-Part 2-74: Particular requirements for portable immersion heaters, IEC TS 62371:2008-Characteristics of hollow pressurised and unpressurised ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1000 V, IEC 61508-3:2010-Functional safety of electrical/electronic/programmable electronic safety-related systems-Part 3: Software requirements (see Functional Safety and IEC 61508). Check out this IEC 60364-5-51:2005-Electrical installations of buildings-Part 5-51: Selection and erection of electrical equipment-Common rules for all the downloads.
IEC 62855:2016-Nuclear power plants-Electrical power systems-Electrical power systems analysis, IEC 60335-2-8:2012-Household and similar electrical appliances-Safety-Part 2-8: Particular requirements for shavers, IEC TR 62476:2010-Guidance for evaluation of product with respect to substance-use restrictions in electrical and electronic products, IEC 60794-4-10:2014-Optical fibre cables-Part 4-10: Family specification-Optical ground wires (OPGW) along electrical power lines, IEC 60335-2-82:2017/AMD1:2020-Amendment 1-Household and similar electrical appliances-Safety-Part 2-82: Particular requirements for amusement machines and personal service machines, IEC 61540:1997/AMD1:1998-Amendment 1-Electrical accessories-Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs), IEC 60079-14:2013-Explosive atmospheres-Part 14: Electrical installations design, IEC 60335-2-99:2003/AMD1:2017-Amendment 1-Household and similar electrical appliances-Safety-Part 2-99: Particular requirements for commercial electric hoods, IEC 61084-2-4:2017-Cable trunking systems and cable ducting systems for electrical installations-Part 2-4: Particular requirements-Service poles and service posts, IEC/IEEE 60079-30-1:2015-Explosive atmospheres-Part 30-1: Electrical resistance trace heating-General and testing requirements. Follow this IEC 60335-2-16:2002-Household and similar electrical appliances-Safety-Part 2-16: Particular requirements for food waste disposers for more articles.
IEC 61000-4-4:2012-Electromagnetic compatibility (EMC)-Part 4-4: Testing and measurement techniques-Electrical fast transient/burst immunity test, IEC 61212-3-3:2006-Insulating materials-Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes-Part 3: Specifications for individual materials-Sheet 3: Round laminated moulded rods, IEC 60601-2-6:2012-Medical electrical equipment-Part 2-6: Particular requirements for the basic safety and essential performance of microwave therapy equipment, IEC 60092-501:2013-Electrical installations in ships-Part 501: Special features-Electric propulsion plant, IEC 60335-2-45:2002/AMD2:2011-Amendment 2-Household and similar electrical appliances-Safety-Part 2-45: Particular requirements for portable heating tools and similar appliances, IEC 61196-1-115:2006-Coaxial communication cables-Part 1-115: Electrical test methods-Test for regularity of impedance (pulse/step function return loss), IEC 60364-4-43:2008-Low-voltage electrical installations-Part 4-43: Protection for safety-Protection against overcurrent, IEC 61189-2-719:2016-Test methods for electrical materials, IEC 60893-3-6:2003+AMD1:2009 CSV-Insulating materials-Industrial rigid laminated sheets based on thermosetting resins for electrical purposes-Part 3-6: Specifications for individual materials-Requirements for rigid laminated sheets based on silicone resins, IEC 61340-4-1:2003-Electrostatics-Part 4-1: Standard test methods for specific applications-Electrical resistance of floor coverings and installed floors. Check out this IEC TR 60943:1998-Guidance concerning the permissible temperature rise for parts of electrical equipment, in particular for terminals for the best information.
IEC 60601-1-6:2010/AMD2:2020-Amendment 2-Medical electrical equipment-Part 1-6: General requirements for basic safety and essential performance-Collateral standard: Usability, IEC 60885-3:2015-Electrical test methods for electric cables-Part 3: Test methods for partial discharge measurements on lengths of extruded power cables, IEC 60092-509:2011-Electrical installations in ships-Part 509: Operation of electrical installations, IEC 61800-5-1:2007/AMD1:2016-Amendment 1-Adjustable speed electrical power drive systems-Part 5-1: Safety requirements-Electrical, IEC 60216-4-1:2006-Electrical insulating materials-Thermal endurance properties-Part 4-1: Ageing ovens-Single-chamber ovens, IEC 62083:2009-Medical electrical equipment-Requirements for the safety of radiotherapy treatment planning systems, IEC 60335-2-84:2019-Household and similar electrical appliances-Safety-Part 2-84: Particular requirements for toilet appliances, IEC 61508-2:2010-Functional safety of electrical/electronic/programmable electronic safety-related systems-Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems (see Functional Safety and IEC 61508), IEC 60051-8:2017-Direct acting indicating analogue electrical measuring instruments and their accessories-Part 8: Special requirements for accessories, IEC 60885-3:2015-Electrical test methods for electric cables-Part 3: Test methods for partial discharge measurements on lengths of extruded power cables.